Kayak Hanger

SKU:
KH
$21.90
0
No votes yet
Write a review

This simple yet very effective kayak hanger system allows you to store boat and paddle off the floor and out of the way, creating additional space for even more toys!

Sizes & Set Up

1 Boat Hanger comes with 2 - Eye screws, 2 - 8.5' long S-hook straps that loop back and create a 4' hanging sling for your boat.

Step One) Find a good place to hang your Kayak Hanger and mount the Eye screws

Step Two) Hang the S-Hook straps with the loop end on the top.

Step Three) Take the S-Hook on the bottom and hook it into the loop that is hanging from the top and do the other side the same way.

Step Four) Adjust the slider to make your sling smaller if needed depending on what boat your storing and it's now ready to hang your boat.

 

2 Boat Wall Rack Hanger comes with 2 - Eye screws, 2 - 6' S-hook Straps, 4 - 6' extensions that loop back and create a 3.5' hanging sling for your boat.

Step One) Find a good place to hang your Kayak Hanger and mount the Eye screws

Step Two) Hang the S-Hook straps 

Step Three) Take the (upside down)  Cam Buckle end of one extension and insert the S-Hook Strap tail end. Bring the Cam Buckle all the way to the top or your desired height. Take the bottom S-Hook and bring it up and hook it into the loop that is hanging from the Cam Buckle. Do the other side the same way and adjust until level.

Step Four) Adjust the slider to fit the sling to your boat.
Step Five)  Add the lower boat hanger (Same as Step 3) and adjust as need for your space.

 

3 Boat Wall Rack Hanger comes with 2 - Eye screws, 2 - 9' S-hook Straps, 6 - 6' extensions that loop back and create a 3.5' hanging sling for your boat.

Step One) Find a good place to hang your Kayak Hanger and mount the Eye screws

Step Two) Hang the S-Hook straps 

Step Three) Take the (upside down) Cam Buckle end of one extension and insert the S-Hook Strap tail end. Bring the Cam Buckle all the way to the top or your desired height. Take the bottom S-Hook and bring it up and hook it into the loop that is hanging from the Cam Buckle. Do the other side the same way and adjust until level.

Step Four) Adjust the slider to fit the sling to your boat.

Step Five)  Add the second set of exstentions (Same as Step 3)

Step Six) Add the third set of extentions (Same as Step 3) and adjust as need for your space.